Stone Setting and Automation Pioneer

Stone Setting Machine
SZ19

This compact machine offers you the possibility to set stones on plate, in tubes and single and double channels with diamonds and synthetic stones.
It is impossible to mention all the advantages of this unit.

Some of the most important advantages are :

easy to operate, no special graduated people are required
can be used for piece work as well for serial work
fast to operate and with a continuous level of quality
economical price considering the speed of setting

Channel Setting Wheel 

Some of the most important advantages are :

easy to operate, no special graduated people are required
can be used for piece work as well for serial work
fast to operate and with a continuous level of quality
economical price considering the speed of setting

Pave Setting 

Capability

Designed, Engineered and
Made in Belgium 

On Rings, bangles chains, bracelet, pendants, earring. 
On Gold, Silver, Platinum, Steel, Brass....etc.

Channel Setting

Channel setting is a method whereby stones are suspended between two bars or strips of metal, called channels. Often when setting small stones and the bars go in a line with the design it is called channel setting, and when the bars cross the lines of the design, it is called bar set. The idea is the same, though. The channel is some variation of a "U" shape, with two sides and a bottom. The sides are made just a bit narrower than the width of the stone or stones to be set, and then, using the same burs as in prong setting, a small notch, which is again called a bearing, is cut into each wall. The stone is put in place in those notches, and the metal on top is pushed down, tightening the stone in place.

Bezel Setting

The earliest known technique of attaching stones to jewelry was bezel setting. A bezel is a strip of metal bent into the shape and size of the stone and then soldered to the piece of jewelry. Then the stone is inserted into the bezel and the metal rubbed over the stone, holding it in place. This method works well for either the cabochon or faceted stones.

Chain Set

Using our special rolling wheels , this is possible as well with our SZ19 machine.

Pave Setting

The pavé setting, pronounced “pa-vay,” comes from the French word “to pave,” as in paved with diamonds. By closely setting small diamonds together with minimal visibility of the tiny metal beads or prongs holding the stones in place, the effect is one of continuous sparkle..